Cabinets to accommodate measuring instruments, automation equipment, heating and ventilation systems
Cabinets are designed to accommodate devices, automation equipment, heating and ventilation systems
and auxiliary equipment. The cabinets are a welded structure made of carbon steel with a polymer coating.
From the front, the cabinet has an opening door with a transparent window.
For installation of devices in the cabinet there is a mounting panel.
Cabinets, depending on the version, can be operated
both in heated rooms and in the open air.
Cabinets provide protection of the equipment against
extraneous interference and environmental influences,
maintaining the temperature for the normal functioning of the mounted in the cabinet of equipment,
convenience of connecting auxiliary equipment.
Depending on the location of the cabinet in an open area
or indoors, the cabinets have several versions:
Alufol - foil foamed polyethylene is used as a thermoisolator.
To maintain the temperature sufficient for the normal
functioning of the placed equipment in the cabinets of
versions 2 and 3, an electric heater with a thermostat is
installed. The cabinets can also be equipped with a forced
Overall sizes (WхHхD)
- version 1 (without a heater)
400х530х210 mm 500х630х210 mm 500х730х210 mm 600х1030х210 mm
- version 2 (with a heater)
- version 3 (with a heater in a double cabinet)
Degree of protection against penetration of dust and water
- version 1
Т=(+5..+50)°С, φ < 80% on Т=25°С
- version 2
Т=(-40..+50)°С, φ < 100% on Т=25°С
- version 3
Т=(-50..+50)°С, φ < 100% on Т=25°С
The influence of vapors of aggressive substances (acids, alkalis, etc.)
AC Power Supply Voltage for heater
~(100...240) В / 50 Гц
Supported temperature inside the cabinet (for cabinets of versions 2 and 3)
Material of cabinet
carbon steel with polymer powder coating
Insulation material (for cabinets of versions 2 and 3)