DO-5101 analyzer is designed to measure the dissolved oxygen concentration and temperature of the
liquid to be analyzed. The analyzer is a one-channel measuring tool that
consists of barometric sensor, a wall-mounted measuring instrument..
The analyzer is equipped with
submersible holder или hydraulic panel HP-5101 with flowing measuring cell for ultra-pure water analysis.
Dual-channel Analyzer of dissolved oxygen is designed for measuring dissolved oxygen
concentration and temperature of the analyzed liquid, with digital and graphical indication of measured parameters,
with alarms when the measured parameter outside specified values.
The dual-channel analyzer is a measurement tool consisting of one or two amperometric membrane sensors dissolved oxygen and panel-mounting
measurement instrument.
The analyzer is equipped with
holder. The sensor can be equipped with the cleaning cup to auto-clean it by air flow..
The dual channel analyzer is a measurement tool consisting of one or two optical sensors, with
fluorescentes feelings-sensitive surface, and the measuring device panel or wall mounting.
The analyzer can be equipped with a lot type of holders.
The sensor can be equipped with the cleaning cup to auto-clean it by air flow.
Advantages of optical sensors of dissolved oxygen before membrane type:
regular calibration and maintenance is not required;
there are no requirements to the flow of the measured liquid;
The dual channel analyzer is a measurement tool consisting of one or two optical sensors
VisiFerm DO or VisiTrace DO and the measuring device panel mounting.
The analyzer can be equipped with holders.
The sensor can be equipped with the cleaning cup to auto-clean it by air flow.
Hydropanel HP-5101 is designed for
preliminary preparation of controlled liquid: setting the nominal value and stabilize the flow through measuring cell,
in which mounted the amperometric sensor (with built-in temperature sensor); to ensure noise immunity of the
measurements; also to calibration of the sensor by air or with calibration gas mixture.
Sodium analyzer SA-7101 (analyzer) is designed for measuring activity level (pNa) and mass concentration (cNa)
of sodium ions in chemically demineralized water, high pressure boilers steam condensate and turbines and
also for controlling of quality of H+ cation-exchange filters.
The analyzer also provides a measurement of the temperature of the analyzed
fluid and the degree of activity of hydrogen ions (pH), characterizing the effect of the automatic alkalizing the
analysed liquid by reagent in cell.
Hydropanel HP-7101 for sodium analyser is designed for preconditioning analyzed liquid:
special Fittings stabilize the flow through the measuring cell, in which are placed a combined pH electrode
with a temperature sensor and ion-selective pNa-electrode, providing noise immunity measurement,
addition of an alkalizing agent in analyzed liquid, and for setting the reference analyzer solutions.
The two-channel instrument is designed to measure the turbidity of water and aqueous solutions. The method of
measurement is nephelometric. Areas of application: water treatment, water cleaning, food, brewering, pulp and paper industry.
Optical turbidity sensors TU 8355, TU 8555, TU 8325, TU 8355 are connecting to the controller.
Immersible sensors TU8355, TU8325 have a nozzle cup for cleaning optical lenses with compressed air.
The hydropanel is designed to measure the
turbidity of drinking water, there are turbidity analyzer TU-8122, a flow cell with a turbidity
sensor, a water flow sensor, as well as pipes and auxiliary equipment for supply and discharge of
water in normal mode and during maintenance. Also available execution of the hydropanel in the
cabinet. Thehydropanel can be fixed to the wall or on racks to the floor.
Industrial ionometer AI-9102 (analyzer) is designed to measure the activity index (pX) and the mass concentration
(cX) of one-, divalent ions, the activity of hydrogen ions (pH), temperature (T) and oxidation-reduction potential
(ORP) in the analyzed liquid. The analyzer is made in a casing made of high-impact
polystyrene. The analyzer is used to control wastewater treatment processes and process water treatment plants.